You are here:
(16 Aug 2010, adam)
*ZigBee vs. Bluetooth (4.0) Low Energy (LE)* West Technology Research Solutions – e-mailed 8-11 from hotmail acct. Continua Health Alliance – e-mailed 8-11 Dan @ danjuliodesigns.com - e-mailed 8-11 ( [[http://itp.nyu.edu/camp/?tag=biometrics]]) – response 8-11-10 - electrical engineer. “Zigbee is finding success in control systems but I don't think it's going to be used for biometrics.” TI E2E™ Community – Karl – Texas Instruments Employee (posted question 8-12-10 about biometric sensors) http://e2e.ti.com/members/611890/activities/default.aspx <strong>The Bluetooth Special Interest Group (SIG) – e-mailed </strong> *8-12-10* http://www.bluetooth.com/English/SIG/Pages/default.aspx *THE PLATFORMS ENABLING WIRELESS SENSOR NETWORKS* Jason Hill (firstname.lastname@example.org) is president and CEO of JLH Labs in Capistrano Beach, CA. Mike Horton (email@example.com) is president and CEO of Crossbow Technology, Inc. in San Jose, CA. - old e-mail, no good -- Ralph Kling (firstname.lastname@example.org) is a principal researcher and leader of the Intel Mote project at Intel Research and the Systems Technology Laboratory at Intel Corp. in Santa Clara, CA. Lakshman Krishnamurthy (lakshman.krishnamurthy@ intel.com) is a senior staff engineer in the Communication Technology Lab at Intel Corp. in Hillsboro, OR. --- ZigBee Alliance - e-mailed 8-11 (auto-response RE: ZigBee Sensors [1066007:1029385]) – 8-12-10 responded, re-e-mailed biometric sensors, From: ZigBee Alliance Help Desk (8-13) -- Executive Director will see if he can provide any information regarding personal health-care biometric Zigbee sensor company information. Waiting 5-10 business days for a response.<br />----------------- <a target="_blank" href="http://zigbee.org/imwp/web3/reports/ecosystems.aspx">http://zigbee.org/imwp/web3/reports/ecosystems.aspx</a> Contact Information: Information Services / Customer Support Phone: 925.275.6607 Email: email@example.com Address: 2400 Camino Ramon, Suite 375, San Ramon, CA 94583 USA Main: + 1.925.275.6690 Fax: + 1.925.275.6691 Continua picks ZigBee, Bluetooth LE (2009) for health devices, sensors http://mobihealthnews.com/2577/continua-picks-zigbee-bluetooth-le-for-health-devices-sensors/ The two wireless technology standards are targeted to support mobile and fixed location devices as defined by the next iteration of the Continua Health Alliance Design Guidelines. The alliance has selected *Bluetooth low energy* wireless technology (pending finalization of the specification) to *enable low power* <strong>mobile devices such as activity monitors and heart rate sensors </strong>to be<strong> used to monitor a user’s health and fitness levels.</strong> Additionally, Continua has selected *ZigBee* Health Care technology for low power sensors that can be networked in a variety of settings, and utilized in *devices such as motion detectors and bed pressure sensors to enhance the daily living of those who require assistance aging independently.* …ZigBee standard enables powerful new wireless applications for safety, security, and control, ranging from smart energy to home automation and medical care to advanced remote control. *Bluetooth low energy versus ZigBee* Karl from Texas Instruments (Engineer) 9 Mar 2010 8:42 AM I've touched on this topic before outside of the blog, but a recent comment made me think that it could be appropriate to bring it up again. People enjoy some controversy, so what's better than putting different standards up against each other? I'll try to explain the differences and explain why BLE and ZigBee don't really step on each other's toes in my opinion: * First, I would argue that *Bluetooth low energy has been designed as an ultra-low power PAN/BAN (Personal Area Network/Body Area Network*), while *ZigBee is more of a low-power LAN (Local Area Network)*. BLE was designed from the start as a star network around a portable device such as a mobile phone. This means that it has a quite simple network topology, but with nodes dropping off or coming onto the network dynamically as they (or the central device) move in and out of range. It should be easy to add nodes, since they all connect to the central device. *ZigBee was designed from the start to support mesh networking*. This has two purposes; it allows the ZigBee network *to cover a large network area (hence the LAN moniker*), and it allows flexible routing to deal with situations where routing nodes may become unavailable for some reason. This paradigm is more suited to relatively stationary networks, since it takes some time and effort to keep the routing information up-to-date. * Each standard has a couple of killer features that the other one doesn't have, and if you need one of them, the choice is pretty clear. For BLE, it's how *BLE dual-mode means BLE piggy-backs on the huge installed base of Bluetooth devices*. *If you need to ultra-low power communication with a device that already includes Bluetooth (mobile phone, PC, PND, PMP etc.), then BLE should be your protocol of choice*. On the other hand, *if you need mesh networking to cover a large area, then ZigBee is a clear choice*. * Power-wise, ZigBee and Bluetooth are quite different as well. Which one is the lowest power depends on the usage scenario. BLE uses a synchronous connection for it's connections; meaning that both master and slave wake up synchronously. This helps keep power on both sides low. ZigBee uses an asynchronous scheme, this means that the routers stay awake all the time. The power consumption of the routers is then relatively high, but the end-nodes can wake up at any time, send their data and not have to wait for a specific time slot. You need to look into the specifics of your use case to figure out which one would fit your needs better; there is no clear-cut answer to the question "Is ZigBee or BLE lowest power?" There will surely be some overlap in application areas, as there is always some tendency to try to broaden the scope of standards, but overall Bluetooth low energy and ZigBee target different areas. They each have their own strengths and weaknesses. BLE will be able to communicate with billions of Bluetooth devices, but does not support mesh. ZigBee can cover large areas, but is not so well suited to ad-hoc networking and requires powered routers. *Bluetooth* *Low-energy Bluetooth is formally adopted – News – Linux for Devices* http://www.portablegadget.com/bluetooth/low-energy-bluetooth-is-formally-adopted-news-linux-for-devices *Bluetooth. low energy* [[http://www.ti.com/ww/en/analog/bluetooth/index.htm?DCMP=A_Signal Chain_Precision_LPRF&CMP=KNC-GoogleTI&247SEM][http://www.ti.com/ww/en/analog/bluetooth/index.htm?DCMP=A_Signal%20Chain_Precision_LPRF&CMP=KNC-GoogleTI&247SEM]] *Research and Markets: Bluetooth Low Energy Forecast to Dominate Wireless Sensor Network Market says Q2 2010 Report* [[http://finance.yahoo.com/news/Research-and-Markets-bw-4040553799.html?x=0&.v=1]] West Technology Research Solutions analyst Kirsten West, quoted by our sister publication eWEEK, said "<strong>Bluetooth low energy will be a significant contributor to the overall wireless sensor network market, representing nearly half of all shipments in 2015.</strong> The advantage to this new protocol is that it is totally optimized for low power battery operation." http://www.portablegadget.com/bluetooth/low-energy-bluetooth-is-formally-adopted-news-linux-for-devices “<strong>Bluetooth Low Energy</strong> *is* *designed* *to compete with protocols like ZigBee in applications which require infrequent and short bursts of data communication*. The advantage to this new protocol is that it is totally optimized for low power battery operation.” [[http://www.researchandmarkets.com/reportinfo.asp?report_id=1245246&t=d&cat_id]]= *Bluetooth SIG* By 2014, analysts project, consumers will buy over 200 million wireless body sensors every year! Every one of them can communicate best with _Bluetooth_ low energy communication technology! http://www.bluetooth.com/English/Products/pages/health.aspx Ultra Low Power Wireless Quarter http://www.nordicsemi.com/files/Picture/NS_ULP_WQ_Summer09_eR_16pp.pdf *ZigBee* *Tiny Sensors Run Forever (Almost)* Developers of *ZigBee*, a specification for building large networks of low-power radio transmitters, expect the first set of consumer products incorporating the technology to hit the market as early as the fourth quarter of this year. "The great thing with this technology is it's slowly going to surround you -- whether you know it or not," said Bob Heile, chairman of the ZigBee Alliance, which includes more than 175 members, including large multinationals like Motorola, Philips and Samsung. **Upcoming products, including several slated to be unveiled at the alliance's upcoming conference in Chicago this month, are *mostly tailored to home security*. But backers of the technology expect it will eventually be deployed much more broadly, for uses like *landscaping, automated meter reading, and home lighting systems*. http://www.wired.com/techbiz/media/news/2005/09/68700 “Low-power sensing and monitoring is a core competency of ZigBee and we are excited to help Continua build its technology roadmap and help expand the telehealth industry ecosystem,” said Dr. Robert F. Heile, chairman, ZigBee Alliance. “ZigBee Health Care gives care professionals and consumers the ability to connect an almost unlimited number of monitoring devices with ease while maintaining privacy.” http://mobihealthnews.com/2577/continua-picks-zigbee-bluetooth-le-for-health-devices-sensors/
ore topic actions
Topic revision: r3 - 16 Aug 2010, adam
Create New Topic
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki?