The EMS annual membership meeting and board elections are coming up very soon. The meeting will be held on Saturday, December 8th at 1:00 PM. The meeting will take place at Eugene Maker Space. If you want to vote in the board election, please make sure you have your dues paid up for the month of December and you filled out the membership form and waiver at some point in the last year. We will have an online voting system so if you can't make it to the meeting you will still be able to cast your vote. More details on this to come!
I have been writing Arduino software to drive a stepper motor. I am planning to grow this into a complete control program for the laser cutter I've been building. Today I got some interesting things working, and I made some videos and uploaded them to Youtube.
It's just about time for us to hold our first annual meeting since Eugene Maker Space was founded! The meeting will be held on Saturday, December 8th at 1:00PM.
At this meeting we also have to elect our new board. There are currently five positions on the board and all members in good standing will get to vote to fill those slots. We are working on an electronic voting system that will allow you to vote online in the event that you cannot make it to the membership meeting or otherwise do not wish to attend. This should help us reach our quorum so we can officially elect the new board right away. More details about the electronic voting system will follow, but the most important thing to note is that the polls will close on Saturday, December 8th at 2:00PM. That is exactly one hour after the meeting starts. This will give candidates some time to speak their peace before the votes are all cast.
Do you think you might want to run for a board position for 2013? Please do! This is your chance to step up and make a difference in this community. If you think you want to run for a board position, please send an email to the discussion list or talk to some members in person to let us all know why you want to be on the board and what you can bring to the table. Another member must nominate you for a board position. If you wish to nominate someone for a board position, please send an email to the discussion mailing list with a subject line of "NOMINATION - Member Name". That will make it easy for us to keep track of nominations. Nominations will close on November 30th, so make sure you get all of your nominations in before December 1st.
We encourage all members who are interested in this voting process (or are interested in running for a position) to familiarize themselves with our current governing documents. You can review the most recent version of our governing documents on the EMS wiki:
If anyone has any questions about any of this, feel free to email firstname.lastname@example.org and one of us will help you out where possible.
Our open house party is tomorrow from 11:00AM to 4:00PM at 687 McKinley St. Suite #2 in Eugene. We will have projects to show and tell, soldering kits for people to learn soldering, food, and more! If you've been looking for an excuse to finally come check out Eugene Maker Space to see what we are all about, this is the time. This event is open to anyone and everyone so bring your friends and family.
Recently some EMS members have been learning to weld. Unfortunately, the shop hasn't been very welder-friendly. We have the one welder but we really didn't have a good place to weld. The only place we are able to plug in the welder is in the far back corner of the shop, and the only surfaces we really have to weld on back there are the concrete floor or the wooden workbench. Neither of those are very good options. Another problem was that we didn't have a good way to protect other members from being flashed from the welding arc. We had no safety screen. And still a third problem was that we had all of our welding gear separated into a few areas of the shop, so there was never a good way of knowing just what exactly we had or where it all was. Well, fret no longer!
After visiting HeatSync Labs in Arizona a couple of weeks ago and seeing their awesome welding booth, it really got me motivated to make something in our shop that would enable our members to weld more easily, and more safely. The problem was making welding readily accessible but not taking up too much space in our already crowded shop. After some thought and planning, I managed to cobble something together that I hope will work out well. I mounted a custom curtain rod in the corner of the shop near the 240V power outlet and stuck two 6' x 8' welding curtains on it. Now we should have enough room to store all of our welding gear in or near this small 6' x 5' square and be able to weld simply by pulling back the welding curtains and securing them shut. The curtains also allow us to keep that large square open when the booth is not in use. This way, the welding booth doesn't take up a large square of the shop at all times.
The welding booth is not yet completed, but I hope to have it mostly completed by Friday night, before the big open house on Saturday. I still need to do the following:
- We should be getting a decent welding table tomorrow to put in the booth (Donated!). Now we will have a surface to weld on!
- Move the welder into the booth wherever it makes sense.
- Put some adhesive Velcro on the curtains so we can attach them together easily and quickly.
- Cut the white shelf on the wall so the curtain can close all the way to the wall.
- Replace the zip ties with actual curtain rings.
- Install some kind of ventilation to get the fumes moving out of the shop.
- Put up some signage about general usage and safety in the welding area.
I'm sure there is more to be done than just that, but those are the top priorities for now. I hope this booth will work out well for everyone. It shouldn't take up much space when not in use but it should provide easy access to the welding equipment whenever one has that urge to fuse metal together.
A few EMS members have been working on entries for the Star Wars Uncut: The Empire Strikes Back project. This is a project where the entire "Empire Strikes Back" movie is split into many 15 second chunks. Anyone is welcome to sign up for one of the 15 second pieces. That person's job is to then re-create that 15 second scene in their own way. All of the clips are later put back together to form a full length feature film. Ben recently posted his entry to the film. Can you figure out what scene this is?
What's been happening at EMS lately? Lots of stuff! First off, I (Rick) have been working on a relay box for Halloween. The ideas is to be able to control 120V circuits with just an Arduino.
Bob is still working hard on his DIY laser cutter. It's been coming along great so far!
Weston continued working on his home made prototyping station. He hopes to build a station that will have everything he needs when prototyping new electronics projects.
Ben, Kassie, and Michelle have all been working together on... a movie? Why not? This is Eugene Maker Space! Making movies is still making! They are filming a couple of scenes for the upcoming crowd-sourced movie, "Star Wars Uncut: The Empire Strikes Back".
What have you been making lately? Come down to Eugene Maker Space and hang out with other local makers!
EMS will be having a membership drive on Saturday, November 3 from 11:00AM to 4:00PM. We hope to make this event similar to our grand opening from last March. We intend to have food, drink, fun projects, and activities for people to do. Please mark your calendars and spread the word! We want to try and increase our membership so we can afford to do more and perhaps move into a larger work space in the near future. More info to follow soon. We hope to see you there!
The Science Program to Inspire Creativity and Excellence (SPICE) held it's second annual Science Open House event at the University of Oregon last Wednesday. Eugene Maker Space member Mark set EMS up with a table at the event so we could represent our group in the community.
Mark brought in his 3d printer and Rick brought in the lockpick Mystery box and vortex cannon. Mark's friend John was also there with his laptop and some custom made 3D models he created in Blender. Dean was also at the event taking photographs, including those below.
We had a lot of people checking out our display. Kids and adults alike were all very interested in learning how to pick locks so I think people were able to leave our display with at least the knowledge of how pin and tumbler locks work. Many people also got to see a 3d printer for the first time and left with a basic understanding of how a 3d printer operates.
All in all the event was a lot of fun! Hopefully we can have an even larger presence next year maybe with some more interactive activities for the younger crowd.
What happened at Open Shop Night tonight?
Weston's project was to make new wheels for his cardboard robot. He had designed some and wanted to print them on Rick's 3D printer. Darrell showed him how to use the printer, and they worked together to get two new wheels printed. Here is the robot with his new wheels. He looks pretty excited about them.
After the new wheels were installed, Weston let the robot roam around the lab for a while.
Ionel, Darrell, and Weston also compared notes on OpenSCAD. I (Bob) built a metal box. After that, I tried to drill out a 5mm coupler to make a ¼ inch coupler, but the hole went off center.